Canon VIXIA HF20 Instruction Manual page 70

- Pressing
[START/STOP]
(when recording movies) or
[PHOTO]
fully (when
recording photos).
- Setting the camcorder to standby mode.
- Changing the camcorder's operating mode.
- Turning off the camcorder.
...... . -.t... .. .
j... . -. ,- -'.,
.u.. .
J.I..
).,$ , . .
-,¥ .. - . - i- L
,.,,)Jq. .
~
. . J,.. . _ ( ..,
,.,.".,A..,
,R.m.
Manual Exposure Adjustment and Automatic Backlight Correction
At times, backlit subjects may appear too dark (underexposed) or sub-
jects under very strong lights may appear too bright or glaring (overex-
posed). To correct this, you can manually adjust the exposure or use
the automatic backlight correction.
(OJ 34)
•
•
•
. .
Exposure~
.POINTS TO CHECK
• Select a recording program other than
Pl~'
Fireworks].
Manual Exposure Adjustment
1 Open (.&) the joystick guide.
2 Select (AT)
[~
Exposure] and press
@.
• The current exposure is locked.
• The exposure adjustment indicator
0 - 1 - 0
and the neutral value "±O" appear
on the screen.
• The adjustment range and the length of the exposure adjustment
Indicator will vary depending on the initial brightness of the picture.
• If you operate the zoom, the brightness of the image may change.
3 Adjust the (.....
~)
the brightness of the image as required, then
hide (T) the joystick guide.
• The exposure adjustment indicator will change to white and the
selected exposure will be locked.
• During exposure lock, press
@
twice to return the camcorder to
automatic exposure.
70.
Video