Table of Contents
Advertisement
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
The Settings menu allows you to configure DiVitas Client options and display information
about the network. This chapter describes the Settings options.
Phone Settings
The Phone settings menu has the following options.
Force calls via DiVitas
The
Force calls via DiVitas
outbound calls through the DiVitas Server instead of through the handset's native dialer.
Calls initiated by typing a number, selecting a contact, call log, or web link will use the
DiVitas Client dialer instead of the native dialer.
This option is enabled by default.
To disable the option, select
DiVitas. The state changes from Enabled to Disabled. To re-enable it, use the same
procedure to change the state to Enabled.
To use this option, you must leave the DiVitas Client running. If you exit the
DiVitas Client, the handset's native dialer will be used to place outbound calls.
Auto-start DiVitas Client
The
Auto-start DiVitas Client
each time the handset is powered on or rebooted.
This option is enabled by default.
1. When enabled, the caller ID for all outbound calls will be the caller ID that is associated with your DiVitas Client extension.
Likewise, all outbound calls will appear in the DiVitas Client call log.
option makes the DiVitas Client the default dialer, placing all
1
Options
>
Settings
>
Phone settings
option configures the DiVitas Client to start automatically
DiVitas Client User Guide for Nokia E and N Series Phones, v2.7
Settings Options
>
Force calls via
63
Advertisement
Table of Contents
