Table of Contents
Advertisement
Installing the DiVitas Client – Overview
Getting Started
Installing the DiVitas Client – Overview
Generally, your system administrator will install and configure the DiVitas Client for you.
You can verify whether the DiVitas Client has been installed by trying to launch the client.
If the DiVitas Home screen, privacy and billable events notices, or the Enter password
■
dialog appears when you launch the DiVitas Client, this means your account is
already set up, and you can proceed to
page
If the Nokia disclaimer appears or a screen of DiVitas Client configuration settings
■
appears (extension number, password, server IP, and mobile number), this means the
application has been installed, but you will need to enter values for these settings
before you can sign in. (See
page 73
■
If neither of the above scenarios applies, you may need to install the application on
your handset. The section below offers the simplest method for installing the DiVitas
application. An alternative method appears later in this document.
Installing the DiVitas Client onto the Handset
For a list of supported handset models, please refer to the following URL:
http://www.divitas.com/Product-sup-devices.html
Before installing the DiVitas Client, make sure the Nokia device is running the
correct firware version. (See
on page 69
Download of a DiVitas Client image during installation or upgrade over a CellData
(packet data) connection can take a long time. If possible, use a WiFi connection
instead. If you do use CellData, leave the handset stationary if possible. Moving
the handset during the download can cause the download to fail, in which case
you will need to start the installation or upgrade process again.
To install and set up the DiVitas Client:
1
On the handset, open the email or SMS message sent by the DiVitas Server.
Contact your system administrator if you do not receive this message.
2
Two links appear within the SMS message – one link connects to the internal IP
address (or FQDN) of the file server, while the other link connects to the external IP
address (or FQDN) of this same server.
●
10
13.
for more information.)
"Verifying Proper Firmware Prior to Installing Client"
for more information.)
If you are inside the firewall, click on the internal link.
"Changing Your DiVitas Client Password" on
"Entering DiVitas Client Configuration Settings" on
DiVitas Client User Guide for Nokia E and N Series Phones, v2.7
Advertisement
Table of Contents
