Using Your Light & Easy ™ Steam Mop - Shark S3251 Series Owner's Manual

Using Your Light & Easy
fig. 6
IMPORTANT: Your steam mop needs water
to make steam! Never use your steam mop
without water in the tank.
Sweep or vacuum your floors prior to cleaning with
your Light & Easy Steam Mop.
™
Steam Mop
™
When you use your steam mop for the first time or
if you have not used the unit in awhile, it may take a
minute or two for the water to travel through the pump
and into the heater to create steam. Get it started by
pumping the handle a few times. If you have waited a few
minutes and you still do not see any steam, reference the
troubleshooting section on page 12.
1
fig. 7
Pull and twist the quick release cord holder to
unwrap the power cord completely. (fig. 6) Plug into
a 220-240 volt electrical outlet. The "On" light will
turn blue. If the light does not turn on, reference the
troubleshooting section on page 12. (fig. 7)
www.sharkninjamanuals.com 8