IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK STEAM MOP, ® WARNING: BASIC SAFETY PRECAUTIONS SHOULD TO REDUCE THE RISK OF FIRE, ELECTRIC ALWAYS BE FOLLOWED, INCLUDING THE SHOCK OR INJURY: FOLLOWING: 1 Use the system only for its intended use.
Page 3
14 DO NOT put any objects into openings. Do not use 28 To avoid circuit overload, do not operate another with any opening that is blocked. appliance on the same mains circuit as the steam cleaner. 15 DO NOT put hands or feet under the steam mop. Unit 29 If an extension cord is absolutely necessary, an gets very hot.
Page 4
EC – the directive for Eco-Design requirements – since according to technical justification, it is considered as inappropriate to provide standby and off modes when connecting to the mains. To reduce energy consumption be sure to unplug the unit after use. THIS BOOK COVERS MODEL NUMBER: S3255UK TECHNICAL SPECIFICATIONS Voltage: 220-240V~, 50-60Hz...
Contents Thank you for Getting Started ..................... 5 purchasing the Using Your Light & Easy Steam Mop ..............8 ™ Shark Light & ® Care of Your Light & Easy Steam Mop ..............10 ™ Easy Steam Troubleshooting ....................12 ™...
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark Light & Easy Steam Mop.
Page 7
fig. 2 fig. 1 IMPORTANT: Never use the Light & Easy ASSEMBLY ™ Steam Mop without attaching a Dirt Grip ™ Remove all the parts from the package. Verify all the Triangle Pad to avoid damage to your floor and listed parts are included.
Page 8
Getting Started fig. 3 fig. 4 ATTACHING THE DIRT GRIP TRIANGLE FILLING THE WATER TANK ™ IMPORTANT: Unplug the Light & Easy Steam ™ Mop before filling the water tank with water. Place the Dirt Grip Triangle Pad on the floor with ™...
Using Your Light & Easy Steam Mop ™ fig. 5 fig. 6 IMPORTANT: Your steam mop needs water Pull and twist the quick release cord holder to to make steam! Never use your steam mop unwrap the power cord completely. (fig. 5) Plug into without water in the tank.
Page 10
Using Your Light & Easy Steam Mop - cont. ™ fig. 7 fig. 8 Wait 30 seconds for the boiler to heat the water. When you need an extra burst of steam to clean Pump the handle a few times to prime the pump, a stuck-on stain, you can use the Steam Blaster ™...
Care of Your Light & Easy Steam Mop ™ fig. 9 fig. 10 AFTER USE AND STORAGE To store the cooled Shark Light & Easy Steam ® ™ Mop, hang on a large hook. (fig. 10) When you have finished using the Light & Easy ™...
Page 12
Care of Your Light & Easy Steam Mop ™ fig. 11 fig. 12 40° CARE OF YOUR DIRT GRIP TRIANGLE PAD ™ Replacement Dirt Grip pads IMPORTANT: The Dirt Grip Triangle Pad may ™ For best cleaning results, we recommend replacing your be very hot from the steam.
Trouble Shooting PROBLEM POSSIBLE REASONS & SOLUTIONS Your steam mop should be securely plugged into an electrical outlet only. The Light & Easy Steam Mop ™ will not turn-on. Check the Mains fuse or circuit breaker. Light & Easy Steam Mop will Is there water in the water tank? If not, add water to your steam mop following ™...
Our customer service helpline (0800 862 0453) is open ® from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at www.sharkclean.eu/uk.
Need help?
Do you have a question about the S3255UK and is the answer not in the manual?
Questions and answers