Shark S3251 Series Owner's Manual page 10

Using Your Light & Easy
2
Wait 30 seconds for the boiler to heat the water.
Pump the handle a few times to prime the pump,
activate steam and moisten the microfibre pad.
(fig. 8)
9 1-800-798-7398
Steam Mop - cont.
™
fig. 9
3
If your Light & Easy
™
steaming, it could be out of water. Unplug the
power cord from the electrical outlet and refill
the water tank at anytime.
fig. 8
Mop with a forward and backward motion to
customize steam output automatically. (fig. 9)
IMPORTANT: Never leave the Light & Easy
Steam Mop with a damp/wet microfibre pad
on any floor surface for any amount of time as
this may damage the floor.
Steam Mop stops
™