Shark S3251 Series Owner's Manual page 8

Getting Started
Your microfibre cleaning pads should be replaced
every 3 months to maximize cleaning performance.
ATTACHING THE MICROFIBRE PAD
1
Place the microfibre cleaning pad on the floor with
the quick fastener strips facing up. Place the Light
& Easy Steam Mop on the top of the pad to attach.
™
(fig. 4)
IMPORTANT: Only add water to the tank.
Chemicals or cleaning solutions may be
unsafe or cause damage.
IMPORTANT: Please wait 3-5 minutes for your
Light & Easy Steam Mop to cool off before
™
removing the microfibre pad.
7 1-800-798-7398
fig. 4
1
2
3
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
FILLING THE WATER TANK
IMPORTANT: Unplug the Light & Easy
Mop before filling the water tank with water.
Remove the water tank cap by turning it counter-
clockwise to the unlocked position. (fig. 5)
A filling flask is included with your Light & Easy
Steam Mop to make filling the water tank easy. Fill
the flask with water and pour it into the tank. Keep
the water level under the MAX' fill line.
Replace the water tank cap and turn it clockwise to
the locked position.
fig. 5
Steam
™
™