Electrical Safety; Hot Surface Safety - Beko WMA 9148 LB1 User Manual

General safety instructions
• Do not forget to close the loading door when leaving the room where the
product is located.
• store all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.

1.3 Electrical safety

• If the product has a failure, it should not be operated unless it is repaired by
the Authorised Service Agent. Risk of electric shock!
• This product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see "Cancelling the
programme" section.
• Plug the product into a grounded outlet protected by a 13 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician. Our
company shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
• Do not wash the product by spraying or pouring water onto it! Risk of electric
shock!
• Never touch the power cable plug with wet hands! Do not grab the power cord
to unplug the machine, always unplug it by holding the socket with one hand,
and pulling the plug with the other hand.
• Product should be unplugged during installation, maintenance, cleaning and
repair procedures.
• If the power cable is damaged, it must be replaced by the manufacturer,
after sales service or a similarly qualified person (preferably an electrician) or
someone designated by the importer in order to avoid possible risks.

1.4 Hot surface safety

6 / EN
While washing the laundry at high temperatures, the
loading door glass will get hot. Considering this fact,
during washing operation keep the children away
from the loading door of the product to prevent
.them touching it
Washing Machine /User's Manual