Electrical Safety; Handling Safety - Beko CMXD 9100 User Manual

with, climb on top or inside the
product. Check inside the
product before use.
• Use child lock to prevent chil-
dren from intervening with the
product.
• Do not forget to close the load-
ing door when leaving the
room where the product is loc-
ated. Children and pets may
get locked inside and drown.
• Children should not perform
cleaning and user mainten-
ance works without an adult's
supervision.
• Keep the packaging materials
away from children. Risk of in-
jury and suffocation.
• Keep all detergents and addit-
ives used for the product away
from children's reach.
• Cut the power cable and break
and deactivate the locking
mechanism of the loading
door before disposing of the
product for children's safety.
1.3

Electrical Safety

• Product should be unplugged
during installation, mainten-
ance, cleaning and repair pro-
cedures.
• If the power cable is damaged,
it must be replaced by the au-
thorised service in order to
avoid possible risks.
• Do not tuck the power cable
under and behind the product.
Do not place heavy objects on
the power cable. Do not over
bend, crush and touch the
power cable to sources of
heat.
• Do not use an extension cord,
multi-plug or adaptor to oper-
ate your product.
• The plug shall be easily ac-
cessible. If this is not possible,
a mechanism that meets the
electrical legislation and that
disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• Do not touch the plug with wet
hands.
• When unplugging the appli-
ance, don't hold the power
cord, but the plug.
• Make sure the plug is not wet,
dirty or dusty.
1.4
• Unplug the product before
moving, remove the water out-
let and water main connec-
tions. Drain any water left in-
side the product.
• The product is heavy, do not
move alone. Do not hold ex-
truding parts such as the laun-
dry loading door to lift and
EN / 5

Handling Safety