Location And Function Of Parts - Sony CBK-WA100 Operating Instructions Manual

Location and Function
of Parts
1
6
3
4
5
A USB connector (type A)
Connect the optional wireless LAN module or
optional modem. Remove the cover to make the
connection.
B SD card slot
Insert an optional SD card. Remove the cover to
insert the card.
C CAM connector (USB mini type B)
Connect to a camcorder/recorder with the supplied
USB cable. Remove the cover to make the
connection.
D SDI IN (HD-SDI input) connector (BNC type)
(CBK-WA100 only)
Connect to a camcorder/recorder with the supplied
BNC cable. This connector inputs the HD-SDI
signals that are output from the camcorder/recorder.
E
(DC input) connector (CBK-WA100 only)
Connect to a camcorder/recorder with the supplied
DC power cable.
2
8 9 0
7
qa qs qd
F WPS button
Use for the WPS function.
You can set the connecting device and access point
semi automatically by using the WPS (Wi-Fi
Protected Setup) function.
G WIRELESS (wireless LAN mode setting) switch
Sets the wireless LAN mode of the wireless
adapter.
"AP": AP mode (Access point mode) (page 8)
"ST": STA mode (Station mode) (page 9)
H ST indicator
Lights in blue when the wireless adapter is in the
STA mode. (Turns off when the wireless adapter is
in the AP mode.)
Flashes in blue while the WPS function is running.
I REC indicator
Lights in red while recording on an SD card.
J STATUS indicator
Indicates the status of the wireless adapter.
STATUS Status of the wireless
indicator adapter
Off Turned off
Lights up in light Turned on (during normal
green condition)
Flashes in light Uploading the file
green quickly (0.2
second intervals)
Flashes in red • The camcorder/recorder is
slowly (0.5 second
intervals) • No input from the SDI IN
• There is a disturbance in the
Flashes in red • Error during initial setup when
quickly (0.2 second
intervals) • A wireless LAN module or
Lights in orange • Unable to connect to the
• Unable to connect to the
Flashes in orange The upload has failed.
K RESET button
Returns the wireless adapter to the factory setting.
L Power switch
To turn the wireless adapter on, set to "@." To turn
the wireless adapter off, set to "1."
turned off
connector
input signal from the SDI IN
connector
starting up
modem is not compatible with
the wireless adapter
Internet by using the modem
access point (during the STA
mode)

Location and Function of Parts

5