Uploading A File; Preparations; Selecting The File And Uploading - Sony CBK-WA100 Operating Instructions Manual

2
Touch at the upper right of the screen > "Delete."
The confirmation screen appears. Touch "OK" to
delete the selected file. Select "Cancel" to cancel
deleting.
To format an SD card
When using an SD card that was formatted with another
system unsupported by the wireless adapter, format it by
the following procedure.
1
Touch at the upper right of the "SD Card" screen
> "Format."
A confirmation screen appears.
Touch "OK" to start formatting. Select "Cancel" to
cancel formatting.
Note
All the data on the SD card are erased when it is
formatted, and the data cannot be restored.
To check the remaining time
The remaining time appears as "Giga Byte" at the top of
the "SD Card" screen.
You can also check the remaining time on the viewfinder
of the compatible camcorder.
16

Uploading a File

Uploading a File
You can upload a proxy file that is recorded on an SD
card, or an original file that is recorded on the
camcorder/recorder to the server on the Internet via the
3G/4G/LTE line or access point.

Preparations

To connect to the Internet
Connect the wireless adapter to the Internet by following
the procedure of "Connecting to the Internet" (page 10).
To register the server for uploading
Register the server for uploading by following the
procedure of "Register the server for uploading"
(page 25)

Selecting the file and uploading

Upload the file that is recorded on an SD card, or the
original file that is recorded on the camcorder/recorder,
to the server.
1
Connect the terminal device to the wireless adapter
via the wireless LAN, start the browser on the
terminal device, then access the wireless adapter
from the browser (page 8).
The "Device Status" screen appears.
2
Display the file list screen for selecting the file.
To upload the file from the SD card
Touch " " > "Media Info" > "SD Card."
To upload the file from the camcorder/
recorder
Touch " " > "Media Info" > "Slot A" (for a
memory card in the slot A) or "Slot B" (for a
memory card in the slot B).
The "SD Card," "Slot A," or "Slot B" screen
appears.