machine.
⑸ When disconnecting the mains cable never pull on the
mains cable or the machine itself.
⑹ Never repair or open the coffee machine yourself. Any
repairs may only be carried out by authorized service
shops using original spare parts and accessories.
⑺ The coffee machine is connected to mains supply via a
mains cable. Make sure nobody can trip over the mains
cable. Make sure children and pets cannot reach the
machine.
⑻ Never put the coffee machine or individual parts of it
into a dishwasher.
⑼ Make sure to install the machine at a place with
sufficient air circulation, to prevent overheating of the
machine.
2. Preparing the coffee machine
2.1 Check supply voltage
The coffee machine is preset in the factory to the
correct mains voltage. Check if your local mains supply
voltage complies with the information given on the type
plate on the underside of the coffee machine.
2.2 Check electrical fuse
The coffee machine is designed for an electric current of
10/15 amperes. Check if the electrical fuse has sufficient
capacity.
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral
water or other liquids.
⑴ Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
⑵ Then fill the water tank and reinstall it. Make sure to
install the tank properly, it must engage audibly.
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a
long time and to avoid damage, please note that the
grinding gear of your coffee machine is not suitable for
coffee beans which were treated, during or after
roasting, with additives (e.g. sugar). Such coffee
blends may damage the grinding gear. Any repair costs
resulting from the use of such blends are not covered
by warranty.
⑴ Open the bean tank cover (12) and remove the aroma
preservation cover (13).
⑵ Remove any dirt or foreign matter from the bean tank.
⑶ Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee.
3
Need help?
Do you have a question about the wsd18-060 and is the answer not in the manual?
Questions and answers