Cleaning The Professional-Cappuccino Frother; Switching Off The Coffee Machine; Programming; Programming The Filter - Java wsd18-060 Operating Instructions Manual

your choice.
13.3 Cleaning the Professional‐Cappuccino Frother
The Professional‐Cappuccino Frother must be cleaned
after each draw‐off operation.
⑴ Fill water in a container and immerse the hose in it.
⑵ Draw off steam until the water/steam mixture is clean.
⑶ If necessary, disassemble the Professional‐Cappuccino
Frother and thoroughly rinse the flow regulator with
water (Fig. 16& 17).
For proper cleaning, use the machine Auto Cappuccino
Cleaning Agent. This is available at your authorized
dealer. Daily cleaning is recommended.
14. Switching off the Coffee Machine
To ensure perfect operation, please switch your Coffee
Machine to standby mode with the (3) symbol first.
Then switch the machine off with the power switch (21).
⑴ DISPLAY: READY
⑵ Switch off the coffee machine using the ON/OFF key
(3).
DISPLAY: RINSING
⑶ An automatic rinsing operation is started.
15. Programming
When your coffee machine leaves the factory it is
adjusted such that you can draw off coffee without
having to change any settings. However, you can
programme various parameters individually.
You can programme the following stages:
Filter
Hardness
Aroma
Temp
Time
Unit On
Unit Off
Cups made
Language
Display
Programming key (4)
Use the programming key (4) to open or quit the
programming mode (no saving of values effected).
Rotary switch
Turn the Rotary Switch to change the adjusted values
or to select the next programming step.
Press the Rotary Switch to check the values adjusted
or to save the values selected.
15.1 Programming the filter
Refer to Chapter 5.1 "Inserting the filter".
11