Programming The Water Hardness; Programming The Aroma Intensive Or; Standard; Programming The Temperature - Java wsd18-060 Operating Instructions Manual

15.2 Programming the water hardness
Refer to Chapter 4 "Adjusting the water hardness".
15.3 Programming the aroma INTENSIVE or STANDARD
When the machine leaves the factory, the aroma is set
to Intensive. If requested it can also be set to
Standard.
⑴ DISPLAY: READY
⑵ Press programming key (4) until FILTER appears. The
program LED(23) and the illuminated ring (2) is active.
⑶ Turn the Rotary Switch (1) until Aroma is displayed.
DISPLAY: AROMA
⑷ Press the Rotary Switch (1).
DISPLAY: STANDARD
⑸ Turn the Rotary Switch (1) until the following message is
displayed:
DISPLAY: INTENSIVE
⑹ To confirm the new aroma settings, press the Rotary
Switch (1).
DISPLAY: AROMA
⑺ Press the programming key (4) to quit the
programming mode or select the next programming
item using the Rotary Switch (1).
DISPLAY: READY
15.4 Programming the temperature
⑴ DISPLAY: READY
⑵ Press programming key (4) until FILTER appears.
The program LED(23) and the illuminated ring (2) is
active.
⑶ Turn the Rotary Switch (1) until Temperature is
displayed.
DISPLAY: TEMP
⑷ Press the Rotary Switch (1).
DISPLAY: HIGH
⑸ Turn the Rotary Switch (1) to change the temperature
from HIGH to NORMAL (or vice versa).
DISPLAY: NORMAL
⑹ To confirm the new settings, press the Rotary Switch (1).
DISPLAY: TEMP
⑺ Press the programming key (4) to quit the
programming mode or select the next programming
item using the Rotary Switch (1).
DISPLAY: READY
15.5 Programming the time
You must programme the time if you want to use the
automatic switch‐on function.
⑴ DISPLAY: READY
⑵ Press programming key (4) until FILTER appears.
The program LED(23) and the illuminated ring (2) is
active.
⑶ Turn the Rotary Switch (1) until TIME is displayed.
12