Using Message Box; Retrieving Messages - Siemens Gigaset M34 USB Application

Using Message Box

If you have set up the Message Box in the Gigaset M34 software, you will receive the
desired messages on the handset. To retrieve the message, make an internal connection
to the Gigaset M34 USB.

Retrieving messages

When a message has been received on your PC, you will hear an advisory tone on the
handset. The Message key on the handset flashes.
ì
Press the Message key on your handset.
You will see a list of the messages that have not yet been retrieved.
ì
Select the option INT... on the handset (e. g. INT 2).
ì
Press the OK display key on the handset.
The internal connection to the Gigaset M34 USB is established. You can read the
message received on your PC.
After reading the message:
ì
Press the End call key on the handset.
The M34 USB menu is displayed.
ì
Press the End call key again on the handset.
The internal connection between the handset and the Gigaset M34 USB is broken.
!
Note that your handset will be blocked to other calls for the duration of
the internal connection.
Message Box
15