Kenwood DDX6016BT Instruction Manual page 72

REFERENCES REFERENCES
❏ USB
"Reading" does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ Android
Sound cannot be heard during playback.
• Reconnect the Android device.
• When <Android Setup> is set to [HAND MODE],
launch any media player application on the
Android device and start playback.
Sound output only from the Android device.
• When <Android Setup> is set to [HAND MODE],
relaunch the current media player application or
use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal
to unit.
72
Cannot playback when <Android Setup> is set to
[BROWSE MODE].
• Make sure KENWOOD Music Play APP is installed
on the Android device.
• Reconnect the Android device and select the
appropriate control mode.
• If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
"NO DEVICE" or "READING" keeps flashing.
• Switch off the developer options on the Android
device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
❏ iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect "iPod".
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) "VoiceOver" on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
• Operate the unit after the artwork has loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
• Select [USB+AV-IN] for <iPod Setup>.
(Page 23)
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
• Select [USB+AV-IN] for <iPod Setup>.
(Page 23)
❏ Radio
AME automatic presetting does not work.
• Store stations manually. (Page 29 )
Static noise while listening to the radio.
• Connect the antenna firmly.