Kenwood DDX6016BT Instruction Manual page 47

SETTINGS SETTINGS
❏ Setting the speakers—car type,
speaker size and crossover frequency
1
Display the <Car Setting> screen.
On the Home screen:
2
Select a car type (1), select the location
of the speakers (2) , then display the
<Speaker Select> screen (3).
3
Select the speaker type (1), select the size
of the selected speaker (2), then display
the <X'over> screen (3).
• When a speaker is not connected, select
<None>.
• When setting the front speakers, also select
the speaker size for <Tweeter>.
4
Adjust the crossover frequency of the
selected speaker.
<TW Gain (L)>/ Adjusts the output volume of
<TW Gain (R)>
the tweeter (left/right).*
<TW FREQ>
Adjusts the crossover
frequency for the tweeter.*
<Gain>
Adjusts the output volume of
the selected speaker.
<HPF FREQ> Adjusts the crossover
frequency for the front or rear
speakers (high pass filter).*
<LPF FREQ>
Adjusts the crossover for the
subwoofer (low pass filter).*
<Slope>
Adjusts the crossover slope.*
<Phase> Selects the phase for the
subwoofer.*
* Appears only when the front speakers are selected.
1
Adjustable only when <Tweeter> is set to <Small>,
* 2
<Middle>, or <Large> on the <Speaker Select>
screen.
* Appears only when the front or rear speakers are selected.
3
*
4 Appears only when the subwoofer is selected.
Not adjustable when <HPF FREQ> or <LPF FREQ> is set to
*
5
<Through>.
*
1 2
*
1 2
3
4
5
4
ENGLISH 47