Sound Adjustment - Kenwood DDX6016BT Instruction Manual

SETTINGS SETTINGS

Sound adjustment

❏ Using the sound equalization
• The adjustments are memorized for each source
until you adjust the sound again. If the source is
a disc, the adjustments are stored for each of the
following categories.
– DVD/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display the <Equalizer> screen.
On the Home screen:
2
Select a sound mode.
• You can change the page to display more
items by pressing [ ]/[
• You can also display the <Equalizer> screen by
pressing [ ] on the source control screen.
46
Storing your own adjustments—Adjusting the
sound precisely
1
Select a sound mode. (See the left column.)
2
Select a band and adjust the level of the
selected band.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
].
3
Adjust the sound.
<Q factor> Adjusts the width of the
frequency.
<Bass EXT> Activates ([ON])/deactivates
([OFF]) bass.
<SW LEVEL> Adjusts subwoofer level.*
• To apply the adjusted equalizer to all playback
sources, press [ALL SRC], then press [OK] to
confirm.
• To clear the adjustment, press [EQ INT].
* Not adjustable when <None> is selected for subwoofer on the
<Speaker Select> screen. (Page 47)