Shark NV500UK Owner's Manual page 11

CHECK FOR BLOCKAGES
MAINTENANCE
REMOVE AND INSPECT:
1 HOSE AND TUBES
Remove Power nozzle, dustcup and hose and shine a torch in all the intake openings to check for possible blockage.
2 BOTTOM OF POWER NOZZLE
CAUTION: Nozzle contains live parts.
a Using a coin, turn the locking screws to the unlock position and pull up to expose the airway. Remove any obstructions,
close and relock.
b Remove any string, carpet fibers or hair that may be wrapped around the brushroll.
3 HOSE CUFF AT BASE OF POD
c Squeeze tabs and remove hose.
d Tilt elbow down 90°.
e Press elbow release latch.
f Remove elbow and check for blockages.
g
Replace elbow by inserting gasket end back into the opening and clip back into the latch.
a
a
b
e
c
d
f
11