Polaris PTV 4x4 Series 10 Owner's Manual page 92

MAINTENANCE AND LUBRICATION
Adjustments
Improper adjustment of the handlebars or incorrect torquing of the
adjuster block bolts can cause limited steering or loosening of the
handlebars, resulting in loss of control and possible serious injury or
death. Perform the handlebar adjustment exactly as outlined.
Handlebar Adjustment
Your PTV has handlebars that can be adjusted for a personal fit.
1. Remove the upper headlight
pod.
2. Loosen the four handlebar
block bolts (1).
3. Adjust the handlebar to the desired
height. Be sure the handlebars do not
touch the gas tank or any other part of
the vehicle when turned fully to the left or right.
4. Lightly tighten each bolt equally to prevent
uneven gaps in the block.
5. Torque the handlebar adjuster block bolts to 10-12 ft. lbs. (14-16
Nm).
6. Replace the headlight pod.
90
WARNING
1