Polaris PTV 4x4 Series 10 Owner's Manual page 51

Electronic Speedometer
Access Sub-menu Features
There are two methods for accessing the sub menu.
1. Press and hold the button and turn the power on, or
2. Press and hold the button for eight seconds. When the display
shows POLArS, release the button.
To display each mode, press the button once to scroll through the four
available functions. Each function will be displayed as follows:
Service Hours
Service Distance
Miles to Kilometers
No Menu Changes
Change Distance Measurement
1. Access the sub-menu.
2. Select COnvrT and release the button. If the last digit in the
odometer display is K, the current measurement is kilometers; if
the last digit is M, distance is being measured in miles.
Set Service Hours
1. Access the sub-menu.
2. Toggle to SET hr, then release the button.
3. In 3 seconds, the LCD will display 5 digits, with the left-most digit
flashing.
4. Within 4 seconds, press and release the button to change the digit.
Once the digit is changed, the button may be held to scroll through
the digits from 0 to 9.
5. After the digit has been selected, do not push the button. After 4
seconds the next digit will flash.
6. Repeat steps 4 and 5 to program the digits for the service interval
selected. (i.e. for service interval of 50 hours set the display to
show: 00050 H)
7. To save the changes press and hold the button when any one of the
digits is flashing.
8. The display will change to DOnE. At this time release the button
and the changes are now saved.
SET hr
SETdIS
COnvrT
DOnE
FEATURES
49