Polaris PTV 4x4 Series 10 Owner's Manual page 85

MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Rear Gearcase Lubrication
1. Position the vehicle on a
level surface. Remove the
fill plug (1) and visually
inspect the lubricant level.
Lubricant should be kept
even with the center of the
drillpoint (2), approximately
1 5/8" below the top of the
fill hole. NOTE: Do not
add lubricant to the bottom
of the fill plug threads. Use
Premium Front Gearcase
Fluid (see page 115).
Oil Changing Procedure
1. Place the vehicle on a level
surface. Place a drain pan
under the drain plug,
remove the plug (3), and
allow the oil to drain.
Discard used oil properly.
2. Clean and reinstall the drain
plug with a new sealing
washer. Torque to 14 ft.
lbs. (19 Nm).
3. Remove the fill plug and
add 10 ounces (300 ml) of
Premium Front Gearcase
Fluid (see page 115).
4. Check the oil level. Oil
level should be kept even with the center of the drill point,
approximately 1 5/8" below the top of the fill hole. NOTE: Do
not add oil to the bottom of the fill plug threads.
5. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm) and check for
leaks.
1
3
1 5/8"
2
83