Polaris PTV 4x4 Series 10 Owner's Manual page 41

Electrical Switches and Indicators
With the engine running, verify the function of all indicator lights each
time the vehicle is used.
1 Transmission Neutral Indicator (Green)
2 Transmission Reverse Indicator (Yellow)
3 High Temp Indicator (Red)
The high temp indicator will light only if the engine overheats.
4 High Beam Indicator (Blue)
The high beam indicator is located on the left-hand switch.
NOTE: The taillight is on whenever the main switch (key) is in the on
position. Turn the key off to prevent battery drain.
Light Switches
The light switch is located on the left handlebar. It's used to turn the
lights on and off and to switch the lights from HI to LO on models
equipped with HI-LO beams. NOTE: The lights won't work unless
the key is in the on position and the shut-off switch is in the run
position.
Operating the vehicle on streets or roads, especially in darkness,
could result in an accident and serious injury or death.
Your vehicle is not equipped with highway-approved lights. It's
designed for and must be used for off-road use only. Use caution
and drive at reduced speeds in conditions of reduced visibility such
as fog, rain and darkness.
3
WARNING
CONTROLS
2 1
39