Polaris PTV 4x4 Series 10 Owner's Manual page 110

MAINTENANCE AND LUBRICATION
Lights
Taillight/Brakelight Lamp Replacement
If the taillight/brakelight does not work the lamp may need to be
replaced.
1. Remove the taillight lens
cover mounting screws (1).
Remove the lens cover (2) and
gasket and set aside for
reassembly.
2. Remove the lamp (3) and
replace it with a new lamp.
3. Test the taillight/brakelight to
see that it's working.
4. Reinstall the gasket and lens cover.
Indicator Lamp Replacement
1. Remove the upper headlight pod to access the back of the indicator
panel.
2. Using a small, straight-blade screwdriver, turn the base of the bad
bulb 1/4 turn counter clockwise.
3. Use a needle nose plier or similar tool to pull the lamp out of the
indicator panel housing.
4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reassemble the pod.
108
3
2
1