• Select
Use loopset
Yes.
Use loopset
is available only when
GPRS modem settings
You can connect the phone via IR connection to a compatible PC and use the phone as a modem to
enable GPRS connectivity from the PC.
Press Menu, select
Settings
access point you want to use. Select
• Scroll to
Alias for access point
access point and press OK.
• Scroll to
GPRS access point
An Access Point Name is needed to establish a connection to the GPRS network. You can obtain the
Access Point Name from your network operator or service provider.
You can also set the GPRS modem service settings (Access Point Name) on your PC by using the Nokia
Modem Options software, see Modem setup on page 97. If you have set the settings on your PC and
your phone, note that the settings made on the PC will be used.
64
©2001 Nokia Corporation. All rights reserved.
to set the loopset in use instead of the headset,
Loopset
and
GPRS modem
Edit active access point
and press Rename. Key in the name you would like for the activated
and press Edit. Key in the Access Point Name (APN) and press OK.
is selected.
settings. Select
Active access point
to change the access point settings.
and activate the