Tone Settings; Accessory Settings; Gprs Modem Settings - Nokia 6310i User Manual

M e n u f u n c t i o n s
Start-up tone
To set the phone to play or not to play a start-
up tone when the phone is switched on, press
Menu, select Settings,
Start-up tone.
If you have set a welcome note, the start-up
tone will not be played, see
page 33.

Tone settings

Press Menu, select Settings
settings. You can find the same settings in
the Profiles menu, see
page 31.
Select Incoming call alert
phone notifies you of an incoming voice call.
The options are Ringing, Ascending,
once, Beep once and Off.
Select Ringing tone, Ringing volume
Vibrating alert for an incoming voice call and
an incoming message. The vibrating alert does
not work when the phone is connected to a
charger, desktop stand, or a car kit.
Tip: You can save a maximum of ten
ringing tones at a time in the ringing
tone list that you have received via
IR or as a text message.
Select Message alert tone
tone for the incoming messages,
tones, or Warning tones
sound tones, for example, when the battery is
running out of power.
Select Alert for to set the phone to ring only
upon calls from phone numbers that belong
to a selected caller group. Scroll to the caller
group you want or All calls

Accessory settings

The accessory settings menu is shown only if
the phone is or has been connected to one of
the accessories, e.g.headset HDC-9P or
handsfree car kit CARK-91.
34
Phone settings and
Welcome note on
and then Tone
Profiles (Menu 3) on
to choose how the
Ring
and
to set the alert
Keypad
to set the phone to
and press Mark.
Copyright © 2004 Nokia. All rights reserved
Press Menu, select Settings
settings. Select Headset,
Loopset. When a handsfree accessory is
connected to the phone for the first time the
active profile of the phone is used.
• Select Default profile
you want to be automatically activated
when you connect the selected accessory.
You can select another profile while the
accessory is connected.
• Select Automatic answer
to automatically answer an incoming call
after five seconds. If the
alert is set to Beep once
answer will not be in use.
• Select Lights to set the lights permanently
on, On. Select Automatic
on for 15 seconds after a keypress. The
Lights option is available only when
Handsfree is selected.
• Select Use loopset
use instead of the headset,
Yes. Use loopset is available only when
Loopset is selected.

GPRS modem settings

You can connect the phone via IR, Bluetooth
or cable connection to a compatible PC and
use the phone as a modem to enable GPRS
connectivity from the PC.
Press Menu, select Settings
modem settings. Select
and activate the access point you want to use.
Select Edit active access point
access point settings.
• Scroll to Alias for access point
Rename. Key in the name you would like
for the activated access point and press
OK.
• Scroll to GPRS access point
Edit. Key in the Access Point Name (APN)
and press OK.
and Accessory
Handsfree or
to select the profile
to set the phone
Incoming call
or Off, automatic
to set the lights
to set the loopset in
and GPRS
Active access point
to change the
and press
and press