Settings (Menu 4); Alarm Clock - Nokia 6510 User Manual

Tip: To change the profile quickly in standby mode, press the power key
profile you want to activate and press Select.
• To set the profile to be active for a certain amount of time up to 24 hours, select
time. When the time set for the profile expires, the previous profile that was not timed, becomes
active.
• To personalise the profile, select Personalise. Select the setting you want to change and make the
changes.
The settings can also be changed in the
addition, you can rename a profile,

Settings (Menu 4)

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is
switched off.
Press Menu, select Settings
when the alarm time is set, select On.
When the alarm time expires
The phone will sound an alert tone, and flash
Press Stop to stop the alarm. If you let the phone continue to alarm for a minute or press Snooze, the
alarm stops for a few minutes and then resumes.
Tone settings
Profile name. The
and Alarm clock. Key in the alarm time and press OK. To change the time
Alarm!
©2001 Nokia Corporation. All rights reserved.
menu, see Tone settings on page 62. In
General profile cannot be renamed.
and the alarm time on the display.
, scroll to the
Timed and set the
57