DUzY II VDY30D2A LOG INSTALLATION
SEQUENCE:
1. Install the rear log (#1) on the two locating pins of
base. See Figure 14. Visually check to verify the log
is securely placed on the pins and in contact with the
grate. See Figure 15.
2. Install the right log (#2) on top of the control cover.
Slide the log back until touching the rear log (#1).
Visually check to verify the log is resting on the grate
and control cover. See Figure 16.
3. Install the left log (#3) with its bottom groove resting on
the right side of the grate bar. Slide the log back until
touching the rear log (#1). Visually check to verify the
log is resting on the grate. See Figure 17.
4. Install the top log (#4) with the base sitting on the rear
log (#1) and the top sitting on log (#4). Visually check
to verify the log is resting on the rear log (#1) and left
log (#3). See Figure 18.
Rear Log
(#1)
Figure 15 - Placing Rear Log (#1)
Left Log (#3)
Bottom
Groove
Figure 17 - Placing Left Log (#3)
32D1999
Figure 14 - base
Figure 16 - Placing Right Log (#2)
Top Log (#4)
Figure 18 - Placing Top Log (#4)
LOG PLACEMENT
Locator Pins
Control
Cover
Right Log
(#2)
13