Sanyo DSR-3716 Quick Operating Manual page 13

To configure easy recording settings based
on your desired recording rate:
1
Press the MENU button to open the MAIN MENU
screen, and choose "2. RECORD SET".
2
On the RECORD SET screen, choose "1. NORMAL
REC EASY SET".
3
On the NORMAL REC EASY SET screen, choose
"REC RATE BASE".
4
Configure the recording rate and other settings as
needed.
<REC RATE BASE>
REC RATE : ----- FPS/CAM
TIMER RECORDING(DLY) : OFF
START --:-- STOP --:--
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
NUMBER OF CAMERAS : 2
RECORDING DURATION : ---- DAYS
qAllows you to set the recording rate.
wAllows you to turn on or off the timer-controlled recording
mechanism.
eAllows you to set the image quality.
rAllows you to turn on or off the sound recording mechanism.
tShows the number of cameras.
yShows the recording duration.
5
Turn the S-dial counterclockwise.
a
A WARNING screen appears.
6
Turn the J-dial to choose "YES", and then turn
the S-dial clockwise.
7
When you are done, press the EXIT/OSD button.
To configure the hard disk recording area
allocations:
Configuring this setting erases any existing recording data.
1
Press the MENU button to open the MAIN MENU
screen, and choose "2. RECORD SET".
2
On the RECORD SET screen, choose
"2. RECORDING AREA SET".
3
Change the normal and alarm recording area
allocations.
q
q w
w
e
e
r
t
y
qShows the total capacity of the hard disk.
wAllows you to set the normal recording area allocation.
eAllows you to set the alarm recording area allocation.
4
When you are done, turn the S-dial
counterclockwise.
a
5
Turn the J-dial to choose "YES", and then turn
the S-dial clockwise.
a
6
When you are done, press the EXIT/OSD button.
About Configuration via Menus
<RECORDING AREA SET>
TOTAL CAPACITY
NORMAL RECORDING AREA
AREA FULL RESET ->
ALARM RECORDING AREA
AREA FULL RESET ->
ARCHIVE AREA
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
A WARNING screen appears.
The recording area allocations are changed and the hard
disk is initialized.
: 120GB
: 80 %
: 19 %
: 1 %
12
English