Then you will go back to the Host Settings page and see the following list.
5.12.3 Target
Choose menu "Advanced→Access Control→Target", and then you can view and set a Target
list on this page. The target list is necessary for the Access Control Rule.
Target Description - Displays the description about the target and this description is
unique.
Information - The target can be IP address, port, or domain name.
Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
Click the Add New... button.
1.
2.
In Mode field, select IP Address or Domain Name.
IP Address:
1)
In Target Description field, create a unique description for the target, e.g. Target_1.
2)
In IP Address field, enter the IP address of the target.
3)
Select a common service from Common Service Port drop-down list, so that the
Target Port will be automatically filled. If the Common Service Port drop-down list
doesn't have the service you want, specify the Target Port manually.
4)
In Protocol field, select TCP, UDP, ICMP or All from the drop-down list.
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-84-