1.
Install the antennas and position them vertically.
2.
Turn off the modem, and remove the backup battery if it has one.
3.
Connect the modem to the Internet port on the router via an Ethernet cable.
4.
Turn on the modem, and then wait about 2 minutes for it to restart.
5.
Power on the router.
6.
Connect your computer to the router (Wired or Wireless)
Wired: Turn off the Wi-Fi on your computer and connect the devices as shown below.
Wireless: Use the default wireless network name (SSID) and password printed on the
product label on the bottom of the router to connect wirelessly.
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-11-