Port Triggering - TP-Link TL-WR1043ND User Manual

Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.

Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
Advanced→Security→Remote Management page to be any other value except 80 such as
8080. Otherwise there will be a conflict to disable the virtual server.
5.9.2

Port Triggering

Choose menu "Advanced→Forwarding→Port Triggering", you can view and add port
triggering on this page. Some applications require multiple connections, like Internet games,
video conferencing, Internet telephoning and so on. Port Triggering is used for some of these
applications that cannot work with a pure NAT router.
To add a new rule, follow the steps below.
Click the Add New... button.
1.
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, TCP,
UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
TCP or UDP, or All.
5. Select Enabled in Status field.
6. Click the Save button to save the new rule.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-66-