Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
How to enable DMZ Host: Log in to the router, Choose menu "Advanced→
4)
Forwarding→DMZ". On the "DMZ" page, click Enable radio button and type your IP
address into the "DMZ Host IP Address" field, using 192.168.0.169 as an example,
remember to click the Save button.
How to enable H323 ALG: Log in to the router, Choose menu "Advanced→Security
5)
→Basic Security". On the "Basic Security" page, check the Enable radio button next
to H323 ALG. Remember to click the Save button.
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-118-