TP-Link TL-WR1043ND User Manual page 110


Default Gateway - Display the default gateway in colon-hexadecimal notation provided by
your ISP.

MTU - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is
1492 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required,
and should not be done unless you are sure it is necessary for your ISP connection.
If your ISP gives you one or two DNS IPv6 addresses, select Use the following IPv6 DNS
Servers and enter the Primary IPv6 DNS and Secondary IPv6 DNS into the correct fields.
Otherwise, the DNS servers will be assigned from ISP dynamically.

Primary IPv6 DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided
by your ISP.

Secondary IPv6 DNS - Enter another DNS IPv6 address in colon-hexadecimal notation
provided by your ISP.

Note:
If you get Address not found error when you access a Web site, it is likely that your DNS
servers are set up improperly. You should contact your ISP to get DNS server addresses.

Connection Mode - The way to connect the ISP.

Always On - Connect automatically.

Connect Manual - Connect by the user manually.
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-103-