TP-Link TL-WR1043ND User Manual page 64

Server Status - Indicates the FTP Server's current status, started or stopped. You can

click the Start button to start the FTP Server and click the Stop button to stop it.
Internet Access – Indicates the current status of Internet Access. Choose Enable to

enable the Internet Access and choose Disable to disable it.
Service Port - The numbers of External Service Ports.

 Internet address - Displays the WAN IP address of this router, so that others can access
FTP through this address. If WAN type is PPPOE/PPTP/L2TP, there would be two
connections. Therefore, users can access FTP Server via two connections. Users in a
private LAN can access FTP Server via Public Address while internet users can access
FTP Server via Internet Address.
To set up your FTP Server, please follow the instructions below:
1. Plug an external USB hard disk drive or USB flash drive into this router.
2. Click the Enable/Disable box to enable/disable internet access to FTP from Internet port.
3. Change the Service Port to specify a port for FTP Server to use. (The default is 21, do not
change unless necessary.)
4. Click Add New Folder to add new folders for the FTP Server.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-57-