Deep Sleep Mode; Power Down Mode - Brother DCP-8250DN Advanced User's Manual

Deep Sleep mode

If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a print job.
When the machine is in Deep Sleep mode,
the LCD backlight is Off and the Home key is
dimmed.
If the machine has secure print data it will not
enter Deep Sleep mode.

Power Down mode

1
If the machine is in Deep Sleep mode for
4 hours, it will then go into Power Down mode
automatically and the Home key will
illuminate pale green. Power Down mode is
the lowest power consumption mode, which
achieves a power consumption of
approximately 0.45 W. To wake up the
machine, press the Touchscreen.
You can enable or disable the Power Down
mode feature by following these steps:
a
Press Menu.
b
Press a or b to display
General Setup.
Press General Setup.
c
Press a or b to display Ecology
Press Ecology.
d
Press Auto Powerdown.
e
Press On or Off.
f
Press Stop/Exit
Note
The machine does not go into Power
Down mode when the machine is
connected to a wired network or has
secure print data in the memory.
General Setup
1
1
3