Ecology Features; Toner Save; Sleep Mode; Deep Sleep Mode - Brother MFC-7360N Advanced User's Manual

Chapter 1

Ecology features

Toner Save

You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a
Press Menu, 1, 4, 1.
b
Press a or b to choose On or Off.
Press OK.
c
Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Greyscale images.

Sleep Mode

The Sleep Mode Setting can reduce power
consumption. When the machine is in Sleep
Mode (Power Save mode) it acts as though it
were turned off. Receiving data or starting an
operation wakes up the machine from Sleep
mode to Ready mode.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data or
makes a copy, the timer will be reset. The
default setting is 3 minutes.
While the machine is in sleep mode the LCD
will show Sleep.
a
Press Menu, 1, 4, 2.
b
Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c
Press Stop/Exit.
2

Deep Sleep mode

1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
1
the machine will automatically enter Deep
Sleep mode, and the LCD will show Deep
Sleep. Deep Sleep mode uses less power
than Sleep mode. The machine will wake up
and start warming up when the machine
receives computer data or when you press a
key on the control panel.
(For MFC-7860DW)
If a wireless network is enabled, the machine
does not enter Deep Sleep mode. To disable
the wireless network, see Chapter 3 in the
Network User's Guide.
1
1