Ecology Features; Deep Sleep Mode; Auto Power Off; Toner Settings - Brother DCP-1512 User Manual

Ecology features

Deep Sleep mode

If the machine does not receive any jobs for a
certain length of time, the machine will go into
Deep Sleep mode automatically and the LCD
will show Deep Sleep. The machine will
wake up when it receives a print job.

Auto Power Off

If the machine remains in Deep Sleep mode
for the time set in the Auto Power Off settings,
it will automatically go into Power Off mode.
Power Off mode is the lowest power
consumption mode, which achieves a power
consumption of approximately 0.5 W. To
disable the Power Off mode, press
a
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b
Press a or b to choose 2.Ecology.
Press OK.
c
Press a or b to choose 2.Auto Power
Off.
Press OK.
d
Press a or b to choose how many hours
before the machine goes into Power Off
mode. Choose 1 hour, 2 hours, 4
hours, 8 hours or Off.
Press OK.
e
Press Stop/Exit.

Toner Settings

1
Toner Setting (Continue
1
mode)
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
a
Press Menu and then press a or b to
1
choose 1.General Setup.
Press OK.
b
Press a or b to choose 4.Replace
Toner.
Press OK.
c
Press a or b to choose Continue or
.
Stop.
Press OK.
d
Press Stop/Exit.
NOTE
• If you continue printing in the Continue
mode, the print may appear lighter.
• After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).
General information
1
1
17
1