Installing Extra Memory - Brother DCP-8250DN Advanced User's Manual

Installing extra memory

a
Turn off the machine's power switch.
b
Disconnect the interface cable from the
machine, and then unplug the power
cord from the electrical socket.
Note
Be sure to turn off the machine's power
switch before you install or remove the
SO-DIMM.
c
Remove the plastic SO-DIMM
cover (1).
d
Unpack the SO-DIMM and hold it by its
edges.
Important
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
B
1
e
Hold the SO-DIMM by the edges and
align the notches in the SO-DIMM with
the protrusions in the slot. Insert the
SO-DIMM diagonally (1), then tilt it
toward the interface board until it clicks
into place (2).
1
f
Put the plastic SO-DIMM cover (1) back
on.
1
Options
2
35
B