9244299_6265_en_au_oth.fm Page 64 Friday, November 18, 2005 11:54 AM
S e t t i n g s
DTMF tones
are sent during an active
call. You can send them manually from
your phone keypad, or send them
automatically by saving them in your
phone.
Set type
In standby mode, select
Menu
Settings
>
Phone
>
DTMF tones
Manual DTMF tones
and one of the
following:
Continuous—The tone sounds for as
long as you press and hold a key.
Fixed—Used to send tones of the
duration you specify in the
length
option.
Off—Used to turn off tones. No tones
are sent when you press a key.
Set length
You can also specify DTMF tone length
when using the
Fixed
option.
In standby mode, select
Menu
Settings
>
Phone
>
DTMF tones
DTMF tone length
>
Short
seconds) or
Long
(0.5 seconds).
Start-up tone
If the
Start-up tone
is activated, the
tone sounds when you turn on your
phone. In standby mode, select
Menu
>
Settings
>
Phone
tone
>
On
or Off.
64
Help text activation
Your phone displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
15 seconds and wait for the help text
to display. Scroll to page through the
full help text, if necessary.
>
>
The default setting for help text is on.
However, you can turn help text on or
off.
In standby mode, select
Settings
>
Phone
activation
>
On
DTMF tone
Voice commands
You can set up to five
which allow hands-free operation of
certain phone features.
Add a voice tag
Before using
Voice
>
must first add a voice tag to the phone
>
function.
(0.1
1. In standby mode, select
Settings
>
Voice
2. Select a function option you wish
to tag, and select Add.
3. Select Start, and speak the voice
tag clearly into the microphone.
>
Start-up
Do not select
Quit
cancel the recording.
Menu
>
>
Help text
or Off.
Voice
commands,
commands, you
Menu
>
commands.
unless you want to