Change Lock Code - Nokia 6265 User Manual

9244299_6265_en_au_oth.fm Page 73 Friday, November 18, 2005 11:54 AM
3. Select Allowed no. if lock active
Assign.
4. Enter the phone number, or select
Search to retrieve the number from
the phone book; select OK.
To place a call to an allowed number
when the phone is locked, enter the
allowed number and press the call key.

Change lock code

When changing the lock code, avoid
using codes similar to emergency
numbers such as 000, 111, or 911 to
prevent accidental dialling of an
emergency number.
By default, the preset lock code is the
last four digits of your phone number.
Depending on your wireless service
provider or network operator, the
preset lock code may be a four-digit
number such as 1234 or 0000. If none
of these work, contact your wireless
service provider or network operator
for help.
If you enter an incorrect lock code five
times in a row, your phone may ask you
for the security code. By default, the
security code is the five-digit number,
12345.
> Note: If you enter the wrong
lock code five times in
succession, your phone will
not accept your current lock
code for 5 minutes. This occurs
even if when you power down
the phone between incorrect
attempts.
To change the phone lock code, do the
following:
1. In standby mode, select
Settings > Security.
2. Enter the current lock code,
and select OK.
3. Select Change lock code.
4. Enter the new lock code (only 4
characters), and select OK.
5. Enter the new lock code again for
verification, and select OK.
When you change your lock code,
make sure to remember it. If necessary,
write it down and store it in a safe
place away from your phone.
Avoid entering a lock code similar to
emergency numbers to prevent
accidental emergency calls.
S e t t i n g s
Menu >
73