Radio Options; Voice Recorder; Record Speech Or Sound - Nokia 6265 User Manual

9244299_6265_en_au_oth.fm Page 52 Friday, November 18, 2005 11:54 AM
M e d i a
Save channel—To save the channel to a
memory location 1 to 9, press and hold
the corresponding number key. To save
a channel to a memory location 10 to
20, briefly press 1 or 2, then press and
hold the desired number. Enter the
name of the channel, select OK.
Select channel—To select to a channel,
select or . To go directly to a
saved channel, briefly press the
corresponding number key.
When an application using a browser
connection is sending or receiving
data, it may interfere with the radio.
When you place or receive a call, the
radio automatically mutes. Once the
call is ended, the radio switches back
on.

Radio options

In standby mode, select Menu
Media > Radio. The radio turns on.
Select Options and one of the
following:
Turn off—Turn off the radio.
Save station—Enter a name for the
channel, and select OK. Select one of
20 locations to save the channel
location.
Stations—Select from the list of
current saved channels on your phone.
Use Options > Delete station
channels or Options > Rename
rename channels.
52
Mono output or Stereo
to the radio in monaural mode or in
stereo (default). Stereo output is
available through a stereo
enhancement.
Headset or Loudspeaker—With the
headset attached, listen to the radio
through a headset or the loudspeaker.
Set frequency—Manually enter the
frequency of a known radio station,
and select OK. You can also press * to
set a frequency.

Voice recorder

Voice recorder allows you to make a
short (up to 3 minutes) recording and
save it to the Recordings
another folder in the Gallery. The
recorder cannot be used when a data
call is active.
>

Record speech or sound

1. In standby mode, select
Media > Voice recorder.
2. To start the recording, select record
virtual button.
3. Hold the phone in the normal
position near your ear, and record
your message.
4. When you are finished recording,
select stop virtual button.
to clear
The recording is given a default name
to
and saved to the Recordings
The default location of the
output—Listen
folder or
Menu >
list.
Recordings