Headset; Handsfree; Loopset; Charger - Nokia 6265 User Manual

9244299_6265_en_au_oth.fm Page 71 Friday, November 18, 2005 11:54 AM

Headset

In standby mode, select
Settings > Enhancements
and one of the following:
Default profile—Choose the profile you
wish to be automatically activated
when a headset is connected.
Automatic answer—Calls are answered
automatically after one ring when a
headset is connected. Select
Note: Automatic answer will
only be active whilst "General"
profile is active

Handsfree

In standby mode, select
Settings > Enhancements
and one of the following:
Default profile—Choose the profile you
wish to be automatically activated
when a car kit is connected.
Automatic answer—Calls are answered
automatically after one ring when a
car kit is connected. Select
Note: Automatic answer will
only be active whilst "General"
profile is active
Lights—Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.

Loopset

Menu > A LPS-4 Loopset accessory allows your
> Headset device to optimise sound quality when
coupled with a hearing aid that is set
to T-coil mode.
In standby mode, select
Settings > Enhancements
Use Loopset >
If the Loopset
On or Off. recognised through the Pop-Port™
connector, the phone automatically
uses the Loopset.

Charger

In standby mode, select
Settings > Enhancements
Menu >
and one of the following:
> Handsfree
Default profile—Select the profile you
want to automatically activate when
your phone is connected to the
charger.
Lights— Select
keep the phone lights always on or to
shut off automatically after several
On or Off.
seconds.

Hearing aid

To optimise sound quality, you can set
your phone to couple to a T-coil-
equipped hearing aid.
In standby mode, select
Settings > Enhancements
aid > T-coil hearing aid
S e t t i n g s
Menu >
> Loopset >
Yes or No.
is connected and
Menu >
> Charger
On or Automatic to
Menu >
> Hearing
mode.
71