Start-Up Tone; Help Text Activation; Voice Commands And Voice Tags - Nokia 6275 User Manual

S e t t i n g s
DTMF tones are sent during an active
call. You can send them manually from
your device keypad, or send them
automatically by saving them in your
device.
Set type
In standby mode, select
Settings > Phone > DTMF tones
Manual DTMF tones
following options:
Continuous—Used to set the tone
sound for as long as you press and hold
a key.
Fixed—Used to send tones of the
duration you specify in the
length option.
Off—Used to turn off tones. No tones
are sent when you press a key.
Set length
You can specify DTMF-tone length for
the Fixed option. In standby mode,
select Menu > Settings
DTMF tones > DTMF tone length
Short (95 ms) or Long

Start-up tone

You can select to have a start-up tone
when you first turn on your device.
In standby mode, select
Settings > Phone > Start-up tone
On or Off.
52 Copyright © 2006 Nokia. All rights reserved.
Menu >
>
and one of the
DTMF tone
> Phone >
>
(350 ms).
Menu >
>

Help text activation

Your device displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
14 seconds, and wait for the help text
to be displayed. If necessary, use the
scroll key to page through the full help
text.
The default setting for help text is On.
However, you can turn help text on or
off. In standby mode, select
Settings > Phone > Help text
activation.
■ Voice commands and
voice tags
Before using voice tags, note the
following:
• Voice tags are not
language-dependent, but depend
on the speaker's voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
Menu >