Checking Your Microwave - Kenwood K30CSS13 Instruction Manual

checking your microwave

Check your microwave after unpacking.
For your safety, the microwave
stops if the door is opened during
cooking. Close the door and press
the Start/+30Sec./Confirm button to
continue the cooking cycle.
1. Open the door.
2. Place a cup of water on the glass turntable plate. Make sure
the cup is microwave-safe (it should not have any decorative
metal trim).
3. Close the door.
4. Press the Stop/Clear button to clear any settings that have
already been made.
5. Press the Start/+30Sec./Confirm button to start a simple
30-second microwave cooking cycle that allows you to check
the operation of the microwave.
6. When the cooking cycle has finished, the water should be hot
(be careful when you take the cup out of the microwave).
7. Press the Stop/Clear button to clear any settings.
18
K30CSS13_IB_RC_131126_Zell.indd 18
Microwave
Grill/Combi.
Convection
W.T./Time
Defrost
Clock/
Kitchen Timer
4, 7
Stop/Clear
5
Start/+30Sec.
/Confirm
26/11/13 2:35 PM