Checking Your Microwave - Kenwood K30GMS18E Instruction Manual

checking your microwave

Check your microwave after unpacking.
For your safety, the microwave
stops if the door is opened during
cooking. Close the door and press the
Start/+30Sec. (1) button to continue
the cooking cycle.
1. Open the door.
GB
2. Place a cup of water on the glass turntable plate. Make sure
the cup is microwave-safe (it should not have any decorative
metal trim).
3. Close the door.
4. Press the Stop/Cancel (2) button to clear any settings that
have already been made.
5. Press the Start/+30Sec. (1) button to start a simple
30-second microwave cooking cycle that allows you to check
the operation of the microwave.
6. When the cooking cycle has finished, the water should be hot
(be careful when you take the cup out of the microwave).
7. Press the Stop/Cancel (2) button to clear any settings.
Smoke and smell may emit during first time use, this is not a fault and will disappear after a
few uses.
24
1
2