Log - Aqua Lung i450T Owner's Manual

LOG

The log stores Information from the latest 24 DIVE and/or GAUGE mode dives for viewing.
• If no dives are recorded, the message NO DIVES YET will be displayed.
• After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
• Dives are numbered from 1 to 24 starting each time a dive is activated in either Dive (or Gauge) mode. After
the post dive 24 hour period has elapsed and the unit shuts off, the first dive of the next activation period will be
recorded as dive #1.
• I n the event that dive time (DIVE MIN) exceeds 999 min, the data at the 999 interval is recorded in the Log upon
surfacing of the unit.
• The message GAUGE or VIOL (violation) will display, above the dive start time, if applicable on the Log Data 1.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes
full. If you do not remember to log or download your dives, they will be lost when the memory over-
writes. See the PC Download section of this manual for instructions on downloading dives.
LOG DATA 1
step backward
through log
records
date of dive
step forward
through log
records
LOG DATA 3
start and end
pressure, blank
if no TMT
recorded elevation of
dive location,
SEA (or EL 2 - EL7)
NOTE: Log Data 4 only displays for nitrox dives; it is bypassed if the dive was an air dive.
© Aqua Lung International, Inc. (2015)
to Log Data 2
dive
start time
dive #
to Log Data 4
or exit
lowest
temperature
LOG DATA 2
max
ascent rate
hr:min
% O Saturation
2
at end of dive, - - if the
dive entered
Violation Gauge Mode
highest PO
reached during
the dive
29
DIVE SURFACE MODE
max depth
to Log Data 3
max tissue loading,
blank if GAUGE dive
elapsed dive time (min)
LOG DATA 4
to exit
gas mix
2
FO (% O )
2 2
Doc. 12-7834-r04 (2/16/16)