Hardware Installation - D-Link DHP-W313AV User Manual

Powerline av 500 wireless ac600 starter kit

Hide thumbs Also See for DHP-W313AV:

Quick installation manual (33 pages)

Table Of Contents

Table of Contents

Section 2 - Installation

Note: Both DHP-W312AV and DHP-308AV are required to create a Powerline network.

Step 1:

- Ensure that the DHP-308AV is connected to your router, via an Ethernet cable and plugged into a nearby power outlet.

Step 2:

- Plug the DHP-W312AV into a wall outlet where you want to extend your network and connect it to a computer via Ethernet cable (for the setup

wizard).

Step 3:

- Press the Simple Connect button on the DHP-308AV device for 3 seconds. Then, within two minutes, press the WPS (Simple Connect) button on

the DHP-W312AV for 3 seconds. The Powerline devices will then reboot and connect.

Note: Network connectivity is confirmed when the Powerline LEDs indicators on both Powerline devices are steadily lit. This will indicate that your network

is now secure.

D-Link DHP-W313AV User Manual