Setting The Temperature - Waeco CoolFun CK40D Instruction Manual

Operation
6.3

Setting the temperature

The cooling capacity can be influenced by:
 The ambient temperature
 The number of wine bottles to be cooled
 The frequency with which the door is opened
➤ Press the "TEMP –" (fig. 2 3, page 3) button to decrease the desired
cooling temperature by 1 °C.
➤ Press the "TEMP +" (fig. 2 4, page 3) button to increase the desired
cooling temperature by 1 °C.
✓ The cooling temperature set in °C then appears in the display for a few
seconds.
✓ The display flashes to confirm that the selected temperature has been set.
6.4 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the vaporis-
er. This reduces the cooling capacity. Defrost the device in good time to avoid
this.
A
NOTICE! Danger of damaging the device!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
22
CK40D
EN