Energy Saving Tips - Waeco CoolFun CK40D Instruction Manual

CK40D
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
6.2 Using the cooler
A
NOTICE! Risk of damage
 Do not switch on the device immediately after transporting it.
This could damage the cooling system. Leave the device to
stand for about 30 minutes after transporting, before you
switch it on. This allows the refrigerant to collect again in the
compressor, and the compressor does not run dry.
 Ensure that the objects or goods placed in the cooling device
are suitable for cooling to the selected temperature.
 Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
 Ensure that your cooler is well ventilated so that any heat cre-
ated can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the cooler on a firm foundation.
➤ Use the cable to connect the cooler to a 220–240 Vw socket.
➤ Switch the cooler on by pressing the "ON/OFF" button (fig. 2 2, page 3).
✓ The display switches on and shows the current cooling temperature in °C.
✓ The cooler starts cooling the interior.
➤ To switch the cooler off, press the "ON/OFF" button (fig. 2 2, page 3).
➤ The display switches off.
EN
Operation
21